DMDP-500

DETNOV’s 500 series of detectors form part of the CMD-500 CO detection system. These have been developed
and certified according to UNE 23300:1984 regulation and the Spanish Technical Building Code [Código Técnico de
Edificación]
The DMD-500 CO detector has been developed using the latest technological advances. Their novel design makes this
range one of the most elegant in the market, ideal for any type of installation and especially for those where a balance
between functionality and aesthetics is needed.
The electrochemical cell and the algorithms used to detect the concentration of CO enable the DMD-500 to provide
high reliability and precision in CO detection. The DMD-500 has 1 ppm resolution and the detector’s response time is
less than 10 seconds.
CO detectors are insensitive to polarity and are connected to the CMD-500 carbon monoxide control panels through
two wires. Any wiring topology is supported to adapt the system to the installation’s requirements. The connection line
can support up to 32 CO detectors with a maximum length of 2 km.
The DMDP-500 detector is ideal for use in places where the IP requirement is very demanding (anti-vandalism and
dirty environments).
Description
Features
° UNE 23300:1984 approved
° Certificate number LOM 08MOGA3532
° Two-wire connection without polarity
° Electrochemical cell
° 1 ppm resolution
° 10 second response time
° 200 m² protected area (limited by regulation)
° 10 years operating life
Applications
Its main application is to activate ventilation systems in car parks or garages, either in a community of neighbors or in
large areas.
If you breathe, even in moderate amounts, carbon monoxide can cause death from poisoning in a few minutes, as it
sistitutes to oxygen in the blood’s hemoglobin.
The air renewal in those spaces where there is a high concentration of combustion vehicles is essential to detect the
concentration of carbon monoxide in order not to have an intoxication with this gas.
Technical features
Detector
Technology:
Operating life:
Resolution:
Response time:
Storage temperature:
Protected area:
Electrochemical cell
10 years
1 ppm
10 seconds
From -10ºC to +80ºC
200 m² limited by regulation
Connections
2 x 1.5 mm² twisted and shielded cable
Environment
Operating temperature: From -5ºC to +40ºC
Relative humidity: 95% without condensation
IP Index: IP54
Physical features
Size 93 mm x 93 mm x 55 mm
Material: ABS
Certification
UNE 23300:1984
Certificate number: LOM 08MOGA3532